Magnetic roller separator

Introduction:

Magnetic roller separator is composed of reducer motor, box body, magnetic roller, rubber roller and so on.The magnetic roller is driven in a circle by reduce motor. The cooling fluid containing powdery magnetic impurities enters the box,the impurities are absorbed to the outer wall of the magnetic roller ,the impurities fluid are extruded after rubber roller extruding,They are separated from rubber roller by scraper,then fall into the trap.

Magnetic roller  separator is made of strontium ferrite or Ndfeb permanent magnetic material, which produces a strong magnetic field and can continuously discharge chips. Steel magnetic roller's diameter is large,so adsorption area is large, Liquid guide plate is installed in the box,and magnetic roller are  concentric circles, The combination of the two can make the magnetic impurities in the separated liquid adsorbed to the magnetic roller to the maximum extent, so as to achieve a good separation effect.

Magnetic roller  separator is mainly used for the separation of powder or fine chips, iron chips and steel chips in the coolant to purify the coolant.Using magnetic separator can reduce the number of wheel corrections, reduce tool wear, and improve the  workpiece.

Application

It is suitable for removal kinds of Iron powder of machine tool coolant, and has excellent effect on improving the machining accuracy and surface roughness of machine tools, keeping the coolant clean and tool life.

The coolant medium is water, kerosene or liquid which kinematic viscosity not greater than 30(CST).

Specification

Notes:

1.When ordering, please indicate the direction of the motor;

 2.According to the actual situation, inlet S and outlet P can be opened on the side of the box body.

3.Inlet S and outlet P can be connected with round hole, square hole or flange.

 4.Can be designed and manufactured according to the size and requirements of users.