Stainless steel bag filtration

Introduction:

Stainless steel bag filtration is a simple, efficient and economical filter equipment, suitable for the removal of small impurities in liquid.The liquid  flows into the filter bag through the inlet of the bag filter. The impurity particles larger than the filter aperture are intercepted on the inner surface or the middle of the filter material, the liquid gathers  at the outlet of the filter, then flow out the filter bag.When impurities on the filter bag accumulate to form the filter cake and the pressure difference reaches the preset value (usually 0.5 ~ 1bar), the clogging alarm device on the filter bag will alarm, and the clogging filter bag should be replaced or cleaned in time.

High flow low pressure loss, save pump energy consumption, it is obvious efficient to mucus filtering.Convenient opening and closing of filter, quick replacement of filter bag, saving labor cost;Safe and reliable, durable;Quick opening design of top cover, loosen the round nut to open the top cover, filter bag replacement is convenient and fast.

Stainless steel bag filtration can bear pressure of 1 ~ 1.5 mpa, The filtration precision  depending on precision of the filter bag.

Application:

Stainless steel bag filtration  is widely used in machine tool coolant, petroleum, chemical, food, pharmaceutical, and water treatment and other fields

Specification

Notes:

1.Can be designed and manufactured according to the size and requirements of users.

2.The  parameters are applicable to emulsion, if it is oil, please contact our technical contact.